| The Katech Elite ® panel, with its offset wave pattern, and 1/2" step every 16", is designed to simulate a clay tile roof.
Manufactured from our standard 26 gauge, galvanized steel, and pre-finished in either the PVC Barrier Series ®, or PVF2 Kynar 500 ® paint finish, the Katech Elite ® tile profile panel, will provide a virtually maintenance free roof, for many years to follow.
The net coverage of the Katech Elite ® panel is 41 3/8" in width, and custom cut to length to the inch, from 4'-0" up to 40'-0". For smaller areas, a 2'-8" panel can be produced.
Installation of the Katech Elite ® panel, for renovation construction can be installed directly over the existing shingles, or onto a 1" x 4" horizontal strapping at 16" o/c spacing. For new construction, the Katech Elite ® tile profile panel can be installed directly onto 1/2" plywood, or onto 1" x 4" horizontal strapping (16" o/c) with an approved building paper. PRIOR TO ANY INSTALLATION, CHECK WITH YOUR LOCAL BUILDING AUTHORITIES FOR THE APPROVED METHOD.
|
