The Katech ® roofing panels are designed to give the appearance of a clay tile roof, without the cost of upgrading the roof structure. A 3/4" step, every 16" across the panel creates the tile-like appearance.

Manufactured from our standard 26 gauge, galvanized steel, and pre-finished in either the PVC Barrier Series ®, or PVF₂ Kynar 500 ® paint finish, the Katech ® tile profile panel, will provide a virtually maintenance free roof, for many years to follow.

The net coverage of the Katech ® panel is 39 1/2" in width, and custom cut to length to the inch, from 4'-0" up to 40'-0". For smaller areas, a 2'-8" panel length can be produced.

Installation of the Katech ® panel, for renovation construction can be installed directly over the existing shingles, or onto 1" x 4" horizontal strapping at 16" o/c spacing. For new construction, the Katech ® tile profile panel can be installed directly onto 1/2" plywood, or onto 1" x 4" horizontal strapping (16" o/c) with an approved building paper. PRIOR TO ANY INSTALLATION, CHECK WITH YOUR LOCAL BUILDING AUTHORITIES FOR THE APPROVED METHOD.